34
Start Zone : xx
End Zone : yy
Press ENTER to Select
AA = Number of panel to be selected.
XX = Start zone number
YY = Ending Zone number
The start zone & end zone is selected by using
the ENTER key. Then press the LEFT/RIGHT key to
change the no of zones. This process can be
continued in case of other Panels to be changed.
4.2.2.2.2
Location Program:
By selecting the number 1 in the keypad from setting menu, it enters
into the location Mode screen. It shows as follows. When entering
into this it will ask the zone number. After entering the zone number
press ENTER key, cursors goes to next line. Then enter the location
using the number / letter key pad, press ENTER key after entering
location.
Select Panel : 01
Press ENTER to
Get Location
Zone 01
<Loc. not entered>
