38
CURSOR KEY:
The cursor keys
‘
’
(Left/Right) key is used to move
the menu list and to toggle between the options in the menu list.
ALPHANUMERIC KEYS
:
These keys are used for entering the names etc. and numbers.
‘*’ Key is used to go back the previous screen in programming
mode.
‘#’ key is used to change the status of modes.
5.2
Status LED:
Normal:
In the Normal Condition,
SYSTEM ON, A.C. ON,BATTERY ON & CHARGER
ON
green LED will be illuminated. There should be
no other amber /
red LED visual indication or audible tone.
SYSTEM ON:
This LED will glow when the panel is energized by primary
or standby power. The LCD Display as shown below.
A.C ON:
This indication shows the panel is powered with AC supply
.
Whenever the Main Supply (220v A.C) fails / fuse blown, the A.C.ON
LED will be shut off and it also indicated in LCD with toggle Buzzer
tone.
BATTERY ON:
This indication shows that the battery (secondary) is
connected with panel
.
Whenever the backup battery fails / fuse
blown, the battery ON will be shut off and it also indicated in LCD
with toggle Buzzer tone.
CHARGER ON:
The Charger on LED is used to show the battery
charging circuit condition. During charger fail/fuse blown, the
charger ON LED will be shut off and it also indicated in LCD with
toggle buzzer tone.
FIRE ALARM
SYSTEM HEALTHY
