33
By default Repeater type is in Passive mode
. By selecting the ‘#’key
it changes to Active mode and By Pressing the ‘ENTER’ key goes into
Active Mode. The LCD display screen is shown as below.
Activ e Repeater
Press # to change
Press ENTER to set
4.2.2.3.
Restore Default:
By pressing the Restore Default Key, All settings will be reseted.
4.2.2.2.
Network configuration:
By pressing the number 2 under the Program screen, the panel
setting are set zone, location program, panel mode and view model
configuration setting are done. They are as follows
4.2.2.2.1
Zone Config: (For RE-127R,RE-127M)
By selecting the number 1 from the program
screen---Panel setting, system enters into the zone config
mode. In this mode the number of panel can be
selected and start zone and End zone can be set. After
entering the set zone mode, screen will be as below.
Select Panel : AA
Press ENTER to select
