29
4.2.1.1 Supervisory
When the main panel detects supervisory signal via
the any normally open contact devices, the repeater
panel will replicate the same in the repeater panel.
The common supervisory LED will glow. The LCD
screen will be as below.
If there is more than one supervisory events the
screen shown as above.
x
– index no. of supervisory event;
y
– Total no. of
Supervisory events;
Zone
Z
– Denotes the zone number who’s programmed site
specific location shown in the repeater display screen.
To change the other indexed supervisory event zones
which are suppressed use right / left arrow keys.
Restoral:
When the supervisory Condition is cleared in the
main panel, the repeater panel will perform the following,
Turn off the Supervisory LED
The LCD screen will be as below. This LCD
screen will replicate in the Repeater Panel.
Supervisory [xx/yy ]
Pn pp Zone Z
Ravel Electronics
Sysyem Healthy
