COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT, INC. 2000
MODEL: K9-5
Classic
Page - 36
Programming Transmitters
Each system includes two pre-programmed transmitters. To program transmitters, such
as when adding a transmitter or changing the button assignment, follow this process:
Step 1- Turn "on" the ignition.
Step 2- Within 5 seconds of turning "on" the ignition, press the Valet Switch 5 times. The
siren will chirp, confirming that for the next 10 seconds the system is ready to learn
a transmitter code. When the first transmitter code is learned all existing stored
codes will be erased. To enter a transmitter code, simply press and release the
transmitter button which is desired to arm and disarm the system*.
Step 3- Repeat this procedure for each transmitter desired to operate the security system.
The system will chirp the siren once to confirm that each transmitter code was
learned. Both of the other two transmitter button's functions will automatically be
learned when the arm / disarm button is learned. If a code is not received within
a 10 second period, the learning process will automatically terminate.
* Other button operations may be used, as shown in this chart:
Arm / Disarm
Trunk Release
3rd Channel
Large Center Button
Small Right Button
Small Left Button
Small Right Button
Large Center Button
Small Left Button
Small Left Button
Large Center Button
Small Right Button
Feature #22 configures arm and disarm to separate buttons; please see the Owner's Manual.
MI_K9-5CLASSIC_REV1
INSTALLATION MANUAL
