Rauch AXIS H 30.2 EMC, Instruction Manual

Page: 15 / 132

Safety
9
3
3.5.3 Checks before start-up
Check the operating safety of the machine before the first and every subsequent
commissioning.

Are all safety devices at the machine installed and functioning?

Are all fasteners and load-bearing connections tightly installed and in good
condition?

Are the spreading disks and their fixings in good condition?

Are the protective grids in the hopper closed and locked?

Is the test dimension of the protective grid lock within the proper range? See
figure 9.6 on page 103 .

Is the hazard zone of the machine clear of persons?
3.5.4 Hazard zone
Flying spreading material may cause serious injury (e.g. to the eyes).
When persons are present between the tractor and the machine, there is a great
hazard caused by the tractor rolling away or machine movements which may
have fatal consequences.
The following figure displays the hazard zones of the machine.
Figure 3.1 : Hazard zones around attachment units
[A] Hazard zone in spreading operation
[B] Hazard zone when coupling/de-coupling the machine

Ensure that no persons are present in the spreading range [A] of the machine.

Immediately stop the machine and the tractor if persons are present in the
hazard zone of the machine.

When actuating the hydraulic lift, ensure that nobody is present in the hazard
zone [B].
A
B