Rauch AXIS H 30.2 EMC, Instruction Manual

Page: 86 / 132

Spreading operation 8
80
8.5.2 Removing and mounting spreading discs
Removing the spreading discs
Proceed for both sides (left and right) as follows.
n
DANGER
Danger of injury from running engine
Working on the machine while the engine is running may result in
serious injuries caused by mechanical components and escaping
fertiliser.
 Never mount or dismount spreading discs while the engine
is running or the PTO shaft of the tractor is rotating.
 Switch the tractor motor off.
 Remove the ignition key.
[1] Adjustment lever
(hopper, left side according to
direction of travel)
Figure 8.2: Adjustment lever
1. Remove the adjustment le-
ver from the bracket.
2. Use the adjustment lever to
loosen the cap nut of the
spreading disc.
Figure 8.3: Loosen the cap nut
1