Rauch AXIS H 30.2 EMC, Instruction Manual

Page: 109 / 132

Maintenance and repair
103
9
Before opening the protective grid:

Disengage the PTO shaft.

Lower the machine.

Turn the tractor motor off. Remove the ignition key.
Figure 9.5: Open the protective grid lock

Execute a regular function check of the protective grid lock. See figure below.

Immediately replace defective protective grid locks.

If required, correct the setting by moving the protective grid lock [1] up/down
(see figure below).
Figure 9.6: Test dimension for functional check of the protective grid lock
1...2 mm
1