Exact calculation of the number of speed pulses over 100 m is very important for the precise
discharge of the fertilizer quantity.
Preparing the speed calibration
u
Conduct the calibration on the field. This reduces the influence of the ground characteristics
on the calibration result.
u
Determine a 100 m long reference track as precisely as possible.
u
Switch on all-wheel drive.
u
Fill only half of the machine, if possible.
n
Accessing the speed settings
You can save up to 4 different profiles for the type and number of pulses and assign names to these
pulses (e.g., tractor name).
Before spreading, check that the correct profile is opened in the control unit.
Fig. 24: Menu Tractor (km/h)
[1]
Active tractor profile
[2]
Display of the number of pulses over 100 m
[3]
Profile is created, currently not used
[4]
Tractor type
[5]
Empty tractor profile
u
Access the menu Machine settings > Tractor (km/h).
n
Recalibrating the speed signal
You can either overwrite an existing profile or create a profile in an empty memory location.
u
In the Tractor (km/h) menu, select the desired profile.
u
Press the
Enter key
.
4. Operation
62
5901646
AXENT ISOBUS
Summary of Contents for AXENT 100.1
