Rauch AXENT 100.1, Complementary Instructions

Page: 58 / 114

Specifying the application rate reduction:
u Access the menu Machine settings > +/- appl. rate (%).
u
Enter the percentage by which the application rate is to be adjusted.
u Press OK.
4.7.3 Overloading function operating mode
The overloading function with different operating modes is described in chapters 5.1 Overloading
and 6.1 Overloading . .
• Observe the operator's manual of your AXENT large area spreader.
They control overloading of fertilizer in the AXIS-PowerPack or LIME-PowerPack spreading units via 2
optional operating modes.
Fig. 22: Symbolic operating mode
[1] Automatic mode [2] Manual
It is recommended to always work in automatic operating mode Automatic mode. The machine control
system fully automatically controls the valves for fertiliser supply according to sensor information.
Start in Manual operating mode and stop overloading by pressing the Activation key. The sensor
conditions signal the required steps.
Operating mode selection
u Switch on the machine control unit.
u Access the menu Machine settings > AUTO/MAN mode.
u Select the desired menu item from the list.
u Press OK.
n
Automatic
WARNING!
Danger of crushing and shearing due to externally-actuated components
The pre-metering slide and the conveyor belt move without warning and may lead to personal
injury.
u
Ensure that nobody is present in the hazard zone.
4. Operation
58
5901646 AXENT ISOBUS