Rauch AXENT 100.1, Complementary Instructions

Page: 70 / 114

u Press Start/Stop.
The test for control of the selected equipment is started.
u
Press Start/Stop again.
The test is completed.
n
Example: metering slides
u
Access the menu Test/diagnosis > Metering slider.
The status of the motors/sensors is displayed.
Fig. 31: Test/diagnosis; Example: Metering slider
[1] Signal display
[2] Signal bar graph
[3] Position display
The Signal display shows the status of the electrical signals for the left and right side separately.
CAUTION!
Risk of injury due to moving machine parts
During the tests, machine parts may move automatically.
u
Before carrying out the tests, ensure that nobody is present in the danger zone of the
machine.
You can open and close the metering sliders with the up/down arrows.
n
Example: LIN bus
4. Operation
70
5901646 AXENT ISOBUS