No. Message in display
Meaning and possible cause
93 This disc type requires a modification on the
TELIMAT device. Please follow the mounting
instructions!
Spreading disc S1 is installed and the machine
is equipped with TELIMAT. Spreading errors
possible during border spreading
•
This spreading disc type requires
conversion of the TELIMAT device.
111 Fault on LS valve
Power supply current is too high; the LS valve
is switched off.
112 Fault on LS valve
Overload
113 Fault on LS valve
The LS valve has not be detected.
•
Cable breakage
•
LS valve defective
7.2
Fault/alarm
An alarm message is displayed with a red frame and with a warning symbol.
Fig. 53: Alarm message (example)
7.2.1
Acknowledging an alarm message
Acknowledging an alarm message:
u
Rectify the cause of the alarm message.
Observe the operating manual for the mineral fertilizer spreader. See also
u
ACK Press
7. Alarm messages and possible causes
AXENT ISOBUS
5901646
109
Summary of Contents for AXENT 100.1
