15 | Care
Original user’s manual
63 / 84
15.5
Descaling the steam nozzle
Tools required
n
Hex wrench
1. Switch the unit off.
2. Swing the hinging racks and the air baffle into the center of the cooking
cabinet.
3. Use the hex wrench to loosen the nut on the steam nozzle.
4. Remove the steam nozzle.
5.
WARNING! Risk of chemical burns! Wear mouth protection and
chemical-resistant gloves to protect yourself reliably when using descaler.
Immerse the steam nozzle in descaler.
6. Leave the steam nozzle in the descaler until the scale has dissolved.
7. Remove the descaled steam nozzle from the descaler.
8. Rinse the steam nozzle thoroughly with water and then allow it to dry
completely.
9. Work in reverse order to re-install the steam nozzle.
15.6
Cleaning the air filter
Tools required
n
Screwdriver
Type XS 6-2/3
1. Insert the screwdriver into the slot on the air filter cover and push the air filter
toward the back.
2. Pull the air filter out.
3. Clean the air filter in the dishwasher and then allow it to dry completely.
>
If the air filter is not clean after going through the dishwasher, it will need to
be replaced.
4. If the air filter is clean, slide it into the unit until it snaps into place.
Type 6-1/1, 6-2/1, 10-1/1, 10-2/1
1. Insert the screw driver into the notches on the air filter cover.
Summary of Contents for iCombi Pro
Page 1: ...iCombi Pro Original user s manual...
Page 2: ......
