Rational iCombi Pro, Original User Manual

Page: 34 / 84

5 | Intelligent cooking - iCookingSuite
34 / 84 Original user’s manual
To view the current cooking cabinet temperature and humidity level:
1. Press and hold
>
After 10 seconds, the current cooking cabinet temperature will be displayed.
2. Release the button to return to the set parameters.
Cooking time
Use this cooking parameter to set a time within which you want your desired
results (e.g., a certain degree of doneness). With some intelligent cooking paths,
you can choose “Continuous mode” to have your unit run uninterrupted using the
settings you have chosen.
1. Adjust this parameter by selecting a running time .
If you set a cooking time, the core temperature parameter will no longer be
available.
Core temperature probe
Use this parameter to set whether you would like to prepare your food with or
without the help of a core temperature probe. After that, you can set a target core
temperature.
Core temperature
Use this cooking parameter to indicate the target core temperature or degree of
doneness you want the food to have.
When choosing core temperature settings, please observe any applicable hygiene
regulations for that food in your country.
Degree of doneness
Use this parameter to specify the degree of doneness you would like your food to
have. Each degree of doneness is associated with a core temperature, which you
can adjust to fit your needs. When cooking using a low-temperature method, the
core temperature may be up to 50°F lower than with other methods. For hygiene
reasons, always set a core temperature of at least 160°F when cooking poultry.
Observe all applicable HACCP regulations in your country.
Delta-T cooking
This cooking parameter is used to maintain a constant differential between the
cooking cabinet temperature and the core temperature. Raising the temperature
of the cooking cabinet gradually, while maintaining a constant differential to the
core temperature, helps cook the food slowly and gently. while minimizing
cooking losses. You can set the differential anywhere between 50°F and 140°F.
To do this, you will need to set your target core temperature.