4 | Working with the unit
28 / 84
Original user’s manual
NOTE
Improper hand shower operation
Yanking the hand shower hose or extending it past the maximum available
hose length can damage the hand shower’s automatic return mechanism, after
which the hand shower will no longer retract into the housing automatically.
1. Do not pull the hand shower out further than the hose length allows.
NOTE
The hand shower is not suitable for cooling the cooking cabinet.
Cooling the cooking cabinet with the hand shower could damage the cooking
cabinet, the air baffle, or the glass on the cooking cabinet door.
1. Only cool the cooking cabinet using the cool-down function.
1. Extend the hand shower out from its storage position by at least 8”.
2. Grasp the hose of the hand shower firmly.
3. Rotate the front section of the hand shower to select a mode.
n
Set the hand shower to
in order to select
jet
mode.
n
Set the hand shower to
in order to select
spray
mode.
If you do not set the front part of the hand shower to one of the two modes, the
hand shower will be blocked.
1. Press the lever on the hand shower. Squeezing the lever harder will increase
the water pressure.
2. When you are finished using the hand shower, guide it back into the housing
slowly.
CAUTION! Make sure that the hose of the hand shower is clean
before retracting it.
4.10
Removing hinging racks
Type XS 6-2/3
1. Grasp the right hinging rack in the middle and press it upward.
2. Unhook the hinging rack and remove it from the cooking cabinet.
3. Lift the left hinging rack and swivel it into the cooking cabinet.
4. Push the hinging rack upward and remove it from the cooking cabinet.
Summary of Contents for iCombi Pro
Page 1: ...iCombi Pro Original user s manual...
Page 2: ......
