30
Rasilient Confidential
- Use or disclosure of data contained on this page is
subject to the restriction on the title page of this document.
2.2
Equipment Installation
For safety reasons, it is recommended that the equipment should be installed as the flow chart as shows.
Figure 2-5: Flow chart
Unpacking:
see 2.2.2.
Rail Kit Assembly:
see 2.2.3
Insert Chassis into Rack:
see Figure 2-13 below.
CMA Assembly:
see2.2.5.
Pull out Chassis from Rack:
see 2.2.6.1.
Drive Assembly:
see 2.2.7.
Push Chassis into Rack:
see section 2.2.8.
Bezel Assembly:
see 2.2.9.
2.2.1
Check the Installation Environment
Check the cabinet or mounting bracket: ensure that rack or mounting bracket should be able to hold eight
times of the total weight of equipment.
Check the cooling space: ensure thermal dissipation space has been enough.
Check another installation environment requirement, please reference the preface of this user manual.
2.2.2
Unpacking
Follow the following steps to unpack the product:
Inspect the package to make sure that it has not been damaged.
If you find damage, contact the local authorized PS392e distributor.
Open the package and check whether any item on the packing list is missing.
Take all items out of the package and check whether any item is in poor condition.
