26
Rasilient Confidential
- Use or disclosure of data contained on this page is
subject to the restriction on the title page of this document.
CAUTION:
For products with multiple power cords, all power cords must be disconnected to completely
remove power from the system.
Below mark is used when multiple power supplies are installed in a system.
2.1.3
Electro-Static Discharge (ESD) Caution and Warnings
WARNING
:
1)
In order to maximize overall product quality and eliminate the possibility of damage from
electro-static discharge, please observe ESD handling procedures wherever this symbol occurs
during the system integration.
2)
Electrostatic discharge (ESD) can damage static sensitive devices or micro circuitry. Proper
packaging and grounding techniques are required to prevent damage.
3)
Keep electrostatic-sensitive parts in their containers until they arrive at a static free work area.
4)
Use a wrist strap connected to the work surface as well as properly grounded tools and equipment
5)
Keep the area free of nonconductive materials such as ordinary plastic tools and foam packing.
6)
Avoid touching pins, leads, or circuitry.
7)
Always place drives with printed circuit board (PCB) assembly-side down.
8)
Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the solder joints
or pins.
9)
If you need to lay the device down while it is out of the antistatic bag, lay it on the antistatic bag.
Before picking it up again, touch the antistatic bag and the metal frame of the system unit at the
same time.
2.1.4
Protection against moving fan blade
A warning symbol as below or a similar symbol combined with the triangle shaped warning sign from ISO
3864-2 is required to be placed closely to the moving part and can be easily found by user during servicing.
CAUTION:
Keep fingers and other body parts away from the moving blade,Failure to take this precaution
may result in personal injury.
