42
Rasilient Confidential
- Use or disclosure of data contained on this page is
subject to the restriction on the title page of this document.
2.2.6.1
Pull out Chassis from Rack
Figure 2-24 Pull out chassis from rack
WARNING
:
To avoid the risk of personal injury or equipment damage, be sure that the rack is adequately
stabilized before extending a component from the rack.
WARNING
: To avoid the risk of personal injury, be careful when sliding the chassis into the rack. The
sliding rails could pinch your fingers.
2.2.7
Drive Installation
2.2.7.1
Install 3.5 inch Drive into carrier
Figures below show a detail sequence of pictures that show the proper kits and method of assembling.
These methods must be followed or failure could occur to the isolator if not properly installed.
Figure 2-25: Drive Carrier Kit for 3.5 inch Drive
