Rangemaster Elite SE, User Manual

Page: 22 / 40

22
Taking care to protect your fingers in case the bulb
should shatter, unscrew the old bulb.
Screw in the new bulb, screw back the bulb cover.
Turn on the electricity supply and check that the bulb
now lights.
Hotplate ignition or hotplate burners faulty
Is the power on? Is the clock illuminated? If not there
maybe something wrong with the power supply.
See ‘power supply’ section further on.
Are the sparker (ignition electrode) or burner slots
blocked by debris?
Is the burner trim correctly located?
Are the burner caps correctly located?
See the section entitled ‘Cleaning’
Hotplate burners will not light
Make sure that the burner parts have been replaced
correctly after wiping or removing for cleaning.
Check that there is not a problem with your gas
supply. You can do this by making sure that other gas
appliances you may have are working.
Do the burners spark when you push the button? If
not check the power is on - is the clock illuminated?
General Safety Instructions
In the UK:
The cooker must be installed by a Gas Safe
registered engineer.
In the Republic of Ireland:
The installation must be carried out by a
Competent Person.
The installation must be in accordance with the
installation instructions and comply with the relevant
regulations and also the local gas and electricity
supply companies’ requirements.
If you smell gas
Don’t turn electric switches on or off.
Don’t smoke
Don’t use naked flames
Do turn off the gas at the meter or cylinder
Do open doors and windows to get rid of the gas
Call your gas supplier.
If you are using natural gas in the UK ring the
National Grid on:
0800 111 999
This appliance is designed for domestic cooking
only. Use for any other purpose could invalidate
any warranty or liability claim.
The use of a gas cooking appliance results in the
production of heat and moisture in the room in
which it is installed. Ensure that the kitchen is well
ventilated: keep natural ventilation holes open or
install a mechanical ventilation device, (mechanical
extractor hood).
Prolonged intensive use of the appliance may call
for additional ventilation, for example opening a
window, or more effective ventilation, for example
increasing the level of mechanical ventilation where
present.
The cooker should be serviced by a qualified service
engineer and only approved spare parts used. Have
the installer show you the location of the cooker
control switch. Mark it for easy reference. Always
allow the cooker to cool and then switch off at
the mains and before cleaning or carrying out any
maintenance work, unless specified otherwise in this
guide.
All parts of the cooker become hot with use and
will retain heat even after you have stopped
cooking.