Rane Scratch Live TTM 57SL Operator'S Manual Download Page 53

Page: 53 / 60

TTM 57SL

FOR

SERATO SCRATCH LIVE •

OPERATOR’S MANUAL

2.1

RECORD BURN -

This section of the control vinyl has

been worn. Swap sides or use the track start offset.

BAD RECORD BURN -

Your record is very badly worn

and Scratch Live is unable to track correctly. Swap
sides or get new vinyl ASAP.

TONEARM IS SLIGHTLY TOO LIGHT -

Susceptible to

dust and vibration. Adjust the tonearm.

LEFT CHANNEL MISSING -

The signal from the needle

is not reaching the TTM 57SL Check the cable and
cartridge connections.

LEFT CHANNEL IS NOISE -

Left signal has been lost

with a noisy loose connection.

TONEARM IS EXTREMELY LIGHT -

The needle isn’t

sitting in the groove. Increase the tonearm weight.

RIGHT CHANNEL MISSING -

The signal from the

needle is not reaching the TTM 57SL. Check the cable
and cartridge connections.

RIGHT CHANNEL IS NOISE -

Right signal has been

lost with a noisy loose connection.

RIGHT CHANNEL IS INTERFERENCE - R

ight signal

has been lost with a noisy loose connection and left
channel crosstalk.

Summary of Contents for Scratch Live TTM 57SL





























































Search results

Summary of Contents for Scratch Live TTM 57SL

Reviews:

Related manuals for Scratch Live TTM 57SL

Brands by name

Popular brands

Rane Scratch Live TTM 57SL, Operator'S Manual

Search results

Summary of Contents for Scratch Live TTM 57SL

Reviews:

Related manuals for Scratch Live TTM 57SL

Brands by name

Popular brands