TTM 57SL
FOR
SERATO SCRATCH LIVE •
OPERATOR’S MANUAL
2.1
15
PLAYBACk
CONTROL
THE CONTROL RECORD
The control record has two sides. The first side
is 10 minutes long and contains the Vinyl Scroll
section. The second side is 15 minutes long.
Scratch Live can be configured to work with
records playing at either 33 RPM or 45 RPM,
depending on your preference. The record has
thin marks every minute, and a thicker mark
every 5 minutes (when playing at 33 RPM).
These marks are to assist you when using needle
dropping to move through the track. These
marks do not affect the playback of the track.
THE CONTROL CD
The control CD has
two tracks. The first
track is 15 minutes
long and controls
playback. The second
track is 40 seconds
long and controls vinyl
scroll.
VINYL SCROLL
Vinyl Scroll allows you to select and load tracks
using only your turntables (or CD player) – no
contact with the computer necessary! To use
Vinyl Scroll with turntables, lift the needle off
the record and drop it into special “bonus track”
section at the end of the record’s A side. The
movement of the control disk now controls the
selected track within your library. Lift the needle
out of the Vinyl Scroll section of the record and
into the lead out (between the Vinyl Scroll area
and the end of the record) to change crates or
iTunes playlists. Go back to the Vinyl Scroll area
of the record to choose a track within the crate or
playlist. Once you have found the track you wish
to play, put the needle back at the beginning of
the record and it will load automatically. This
feature is available to CD users. Go to track 2 on
the control CD to access Vinyl Scroll. Find the
track you want to load, and go back to track 1.
The track you selected will be loaded and ready
to play. You can reverse the direction of Vinyl
Scroll and set the sensitivity in the Setup screen.
TIP: You can also use Vinyl Scroll in the
Prepare window.
SEE THE OPTIONS FOR “VINYL
CONTROL” ON PAGE 34.
