R&S SM300
Module Registration Software
Version 04
61
Service Manual SM300: 1147.1652.00
Instrument Part No SM300: 1147.1498.03
1.5.5 User Interface Description
After the program described above is started, the following user interface
appears on the PC screen, including the default values in the indication fields.
Note
This software is generic for all series 300 products and uses therefore as a
descriptor for the instrument specific module the term “Measurement Module“
Main window with
default values
Page control
Information about the instrument is divided into the following pages:
General
– Brief overview of part numbers, serial numbers, instrument
name and part names. This page contains two fields (see “Main window
with default values” above):
–
To be written
Contains default part numbers and names together with serial
numbers of currently connected measurement and PC modules.
–
Read back
Contains data read out from the instrument.
These fields allow you to see the difference between the current
instrument configuration and data written in the instrument.
Instrument
Provides all necessary information about the instrument, i.e. product
date, part number, serial number, instrument name, backplane serial
number, keyboard serial number, modification history, last service
department information and instrument firmware release.
Installed Modules
This is a module history list updated with the current instrument
configuration (modules currently connected are indicated by a tick).
When you load data from a file, this list will be updated.
Control
buttons
Status
indicators
Page
control
