Instrument Assembly for Board and Module Exchange
R&S SM300
Version 04
36
Service Manual SM300: 1147.1652.00
Instrument Part No SM300: 1147.1498.03
1.3.3 Detailed Description of Replacement Procedure
1.3.3.1 Protectors, Front and Rear
Removing
Undo 4 side screws and 2 screws at top and bottom.
Remove screws using tweezers if necessary (see Figure 1-1).
Take off protector (see Figure 1-2).
Figure 1-1
Figure 1-2
Installing
Remount protector on instrument. The side tabs on the protector must
be pressed into the slot.
Caution
The protector’s soft plastic can become damaged during installation!
Fasten 4 side screws (DIN7985 M3×12).
Fasten 2 screws at top and bottom (DIN7985 M3×6 for front;
DIN7985 M3×8 for rear).
