R&S FSH series, Quick Start Manual, Page: 61 / 130

59
E-02
2.7 Enabling Options
The R&S FSH can be fi tted with options (e.g.
distance-to-fault measurements on cables) which
are enabled by entering a key code. The key code
is based on the unique serial number of the
instrument. To add an option, enable it with a key
code.
Operation
„
Press the SETUP key.
„
Press the INSTALLED OPTIONS softkey.
„
Select INSTALL OPTION... under the OPTION
ADMINISTRATION header.
„
Confi rm with ENTER.
An entry box in the lower right corner of the screen
is displayed.
„
Type in the the appropriate option key.
„
Confi rm with ENTER.
If the key entry was successful, the following
notifi cation is given in the bottom of the screen:
If the key entry failed, the following notifi cation is
given in the bottom of the screen:
The correct key code can then be entered.
GalaxyE_v1-10_3.indd 59 GalaxyE_v1-10_3.indd 59 08.04.2009 15:21:44 08.04.2009 15:21:44