R&S 1424.7005.02, User Manual

Page: 475 / 514

Remote Control Basics
R&S
®
NRX
475 User Manual 1178.5566.02 ─ 07
14.4.8.3 Operation Measuring Extended Status Registers
The
CONDition
registers contain information whether a measurement channel is
used. The
EVENt
registers contain information whether a measurement channel was
used since the last query.
For information on index m, see Chapter 14.4.1, "Hierarchy of the Status Registers" ,
on page 461.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Extension Summary
Measurement m+1 measuring
Measurement m+2 measuring
Measurement m+3 measuring
Measurement m+4 measuring
Measurement m+5 measuring
Measurement m+6 measuring
Measurement m+7 measuring
Measurement m+8 measuring
0
0
0
0
0
0
0
+
Figure 14-12: Operation measuring extended status registers
Querying the register:
●
STATus:OPERation:MEASuring:EXTension<RegisterIndex>:
CONDition?
●
STATus:OPERation:MEASuring:EXTension<RegisterIndex>[:
SUMMary][:EVENt]?
Table 14-14: Used operation measuring extended status bits and their meaning
Bit no. Short description Bit is set if a measurement channel is active or for the
extension summary.
0 Extension summary Sum bit of the next lower status register.
1 Measurement m+1 measuring Channel 1
2 Measurement m+2 measuring Channel 2
3 Measurement m+3 measuring Channel 3
4 Measurement m+4 measuring Channel 4
5 Measurement m+5 measuring Channel 5
Status Reporting System
www.allice.de Allice Messtechnik GmbH