R&S 1424.7005.02, User Manual

Page: 406 / 514

Remote Control Commands
R&S
®
NRX
406 User Manual 1178.5566.02 ─ 07
SYSTem:LOCK:TIMeout <timeout>
Sets the maximum time in milliseconds to wait when processing a command if the
device is locked and the sender of the command is not the owner of the lock before the
command is discarded and an error is written to the error queue.
Setting parameters:
<timeout>
Return values:
<result>
13.14 Using the Status Register
Further information:
●
Chapter 14.4.2, "Structure of a SCPI Status Register" , on page 462
● General Status Register Commands .................................................................... 406
● Reading Out the CONDition Part .......................................................................... 407
● Reading Out the EVENt Part .................................................................................407
● Controlling the ENABle Part ..................................................................................408
● Controlling the Negative Transition Part ............................................................... 408
● Controlling the Positive Transition Part ................................................................. 409
13.14.1 General Status Register Commands
STATus:PRESet
.............................................................................................................406
STATus:QUEue[:NEXT]?
................................................................................................ 406
STATus:PRESet
Resets the edge detectors and
ENABle
parts of all registers to a defined value.
Usage: Event
STATus:QUEue[:NEXT]?
Queries the most recent error queue entry and deletes it.
Return values:
<ErrorCode> Numeric value
<positive error number>
Sensor-specific error
<negative error number>
SCPI error message
0
Error queue is empty.
Using the Status Register
www.allice.de Allice Messtechnik GmbH