R&S 1424.6721.02, User Manual

Page: 71 / 162

Remote Control Commands
R&S
®
NRP18S-xx
71 User Manual 1178.3686.02 ─ 05
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:CLEar
Clears the contents of the result buffer in continuous average mode.
Example: BUFF:CLE
Usage: Event
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:COUNt?
Queries the number of results that are currently stored in the result buffer. Available in
continuous average mode.
Example: BUFF:COUN?
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:DATA?
Queries the results of the continuous average result buffer and returns them even if the
buffer is not full.
In contrast,
FETCh<Sensor>[:SCALar][:POWer][:AVG]?
returns a result only if
the buffer is full.
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE <count>
Sets the size of the result buffer in continuous average mode.
You can enable the buffer using
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:
STATe
.
Parameters:
<count> Range: 1 to 8192
*RST: 1
Example: BUFF:SIZE 1
See Chapter 9.3, "Performing a Buffered Continuous Average
Measurement" , on page 123.
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:STATe <state>
Enables or disables the buffered continuous average mode. If the buffer mode is
enabled, all results generated by trigger events are collected in the sensor until the buf-
fer is filled.
You can set the size of the buffer using
[SENSe<Sensor>:][POWer:][AVG:
]BUFFer:SIZE
.
Configuring the Measurement Modes