![background image](http://html1.mh-extra.com/html/rands/1419-0006k02/1419-0006k02_user-manual_774879136.webp)
Remote control commands
R&S
®
NRPxxS(N)
136
User Manual 1177.5079.02 ─ 15
Figure 9-11: Sensor name displayed in the web user interface
Parameters:
<sensorname>
Example:
SYST:NAME "InputModule-X5"
Manual operation:
See
SYSTem:VERSion?
Queries the SCPI version that the command set of the power sensor complies with.
Example:
SYST:VERS?
Query
1999.0
Response: SCPI version from 1999.
Usage:
Query only
9.12.2
Configuring LAN network properties
Requires a power sensor with networking capabilities, a LAN power sensor.
Remote commands:
SYSTem:COMMunicate:NETWork:RESTart
...................................................................... 136
SYSTem:COMMunicate:NETWork:RESet
.........................................................................137
SYSTem:COMMunicate:NETWork:STATus?
..................................................................... 137
SYSTem:COMMunicate:NETWork[:COMMon]:DOMain
......................................................137
SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname
.................................................137
SYSTem:COMMunicate:NETWork:IPADdress
................................................................... 138
SYSTem:COMMunicate:NETWork:IPADdress:GATeway
.....................................................138
SYSTem:COMMunicate:NETWork:IPADdress:INFO?
.........................................................138
SYSTem:COMMunicate:NETWork:IPADdress:MODE
........................................................ 139
SYSTem:COMMunicate:NETWork:IPADdress:SUBNet:MASK
............................................ 139
SYSTem:COMMunicate:NETWork:RESTart
Effective only for the R&S
NRP LAN power sensors.
Configuring the system