![background image](http://html1.mh-extra.com/html/rands/1419-0006k02/1419-0006k02_user-manual_774879132.webp)
Remote control commands
R&S
®
NRPxxS(N)
132
User Manual 1177.5079.02 ─ 15
0x0krrggbb
with
k
= 0: steady on; k
= 1: slowly flashing; k
= 2: fast flashing
rr
= red
gg
= green
bb
= blue
In NRP legacy communication, the parameter is a standard deci-
mal number, representing the corresponding hexadecimal code.
Range:
0x00 to 0x02FFFFFF
*RST:
0x00A0A0A0
Example:
SYST:LED:MODE USER
Sets the system status LED operating mode to user.
SYST:LED:COL #H01a00000
The LED flashes slowly in red.
SYSTem:LED:MODE SENSor
Sets the system status LED operating mode back to the sensor
internal settings.
SYSTem:LED:MODE
<mode>
Sets whether the color of the system status LED is controlled by the power sensor firm-
ware or by the user settings.
For more information, see
.
Parameters:
<mode>
USER | SENSor
*RST:
SENSor
SYSTem:MINPower?
Queries the lower power measurement limit.
[SENSe<Sensor>:]CORRection:SPDevice:STATe
is set to
ON
. The lower measurement limit refers to the sensor or to the combination of a sensor
and the components connected ahead of it.
Use this query to determine a useful resolution for the result display near the lower
measurement limit.
Usage:
Query only
SYSTem:PARameters?
Returns an XML-output containing all commands with the following information, if avail-
able for the command:
●
Default value
Configuring the system