RAM 2013 Cargo Van Owner'S Manual Download Page 90 | Manualshive

Page: 90 / 700

RAM 2013 Cargo Van Owner'S Manual Download Page 90

WARNING!

Deployed air bags and seat belt pretensioners can not
protect you in another collision. Have the air bags,
seat belt pretensioners, and the front seat belt retrac-
tor assemblies replaced by an authorized dealer im-
mediately. Also, have the Occupant Restraint Con-
troller (ORC) system serviced as well.

Maintaining Your Air Bag System

WARNING!

•

Modifications to any part of the air bag system
could cause it to fail when you need it. You could
be injured if the air bag system is not there to
protect you. Do not modify the components or
wiring, including adding any kind of badges or
stickers to the steering wheel hub trim cover or the
upper right side of the instrument panel. Do not
modify the front bumper, vehicle body structure, or
add aftermarket side steps or running boards.

•

It is dangerous to try to repair any part of the air
bag system yourself. Be sure to tell anyone who
works on your vehicle that it has an air bag system.

(Continued)

88

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
88
89
90
91
92
...
»

Summary of Contents for 2013 Cargo Van





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments