RAM 1500 2019, User Manual

Page: 60 / 340

Reprogramming A Single HomeLink Button
(Canadian/Gate Operator)
To reprogram a channel that has been previ-
ously trained, follow these steps:
1. Turn the ignition switch to the ON/RUN
position.
NOTE:
For vehicle’s equipped with Keyless
Enter-N-Go, place the ignition in the RUN
position with the Engine ON. For vehicle’s
equipped with Keyless Enter-N-Go, place
the ignition in the RUN position with the
Engine ON. Make sure while programming
HomeLink with the engine ON that your
vehicle is outside of your garage, or that
the garage door remains open at all times.
2. Push and hold the desired HomeLink but-
ton until the instrument cluster display
shows “CHANNEL # TRAINING”
Do not
release the button.
3. Without releasing the button proceed with
“Canadian/Gate Operator Programming”
Step 2 and follow all remaining steps.
Using HomeLink
To operate, push and release the pro-
grammed HomeLink button. Activation will
now occur for the programmed device (i.e.
garage door opener, gate operator, security
system, entry door lock, home/office lighting,
etc.) The hand-held transmitter of the device
may also be used at any time.
Security
It is advised to erase all channels before you
sell or turn in your vehicle.
To erase the channels press and hold the two
outside HomeLink buttons (I and III) for up
20 seconds. The instrument cluster display
will display “CLEARING CHANNELS.” Re-
lease the buttons when the instrument clus-
ter display shows “CHANNELS CLEARED.”
The HomeLink Universal Transceiver is dis-
abled when the Vehicle Security Alarm is
active.
Troubleshooting Tips
If you are having trouble programming
HomeLink, here are some of the most com-
mon solutions:
• Replace the battery in the Garage Door
Opener hand-held transmitter.
• Push the LEARN button on the Garage Door
Opener to complete the training for a Roll-
ing Code.
• Did you unplug the device for programming
and remember to plug it back in?
If you have any problems, or require assis-
tance, please call toll-free1-800-355-3515
or, on the Internet at HomeLink.com for in-
formation or assistance.
GETTING
TO
KNOW
YOUR
VEHICLE
58