RAM 1500 2019, User Manual, Page: 180 / 340

Turning LaneSense On Or Off
The LaneSense button is located
on the switch panel below the
Uconnect display.
NOTE:
If your vehicle is equipped with a 12–inch
Uconnect Display screen, the LaneSense
button is located above the display.
To turn the LaneSense system on, push the
LaneSense button (LED turns off). A “Lane-
Sense On” message is shown in the instru-
ment cluster display.
To turn the LaneSense system off, push the
LaneSense button again (LED turns on).
NOTE:
The LaneSense system will retain the last
system state on or off from the last ignition
cycle when the ignition is changed to the
ON/RUN position.
LaneSense Warning Message
The LaneSense system will indicate the cur-
rent lane drift condition through the instru-
ment cluster display.
Instrument Cluster Display
When the LaneSense system is ON; the lane
lines are gray when both of the lane bound-
aries have not been detected and the Lane-
Sense telltale
is solid white.
Left Lane Departure — Only Left Lane Detected
• When the LaneSense system is ON, the
LaneSense Telltale is solid white when
only the left lane marking has been de-
tected and the system is ready to provide
visual warnings in the instrument cluster
display if an unintentional lane departure
occurs on the left side.
• When the LaneSense system senses the
lane has been approached and is in a lane
departure situation, the visual warning in
the instrument cluster display will show the
left lane line flashing yellow (on/off). The
LaneSense telltale
changes from solid
white to flashing yellow.
NOTE:
The LaneSense system operates with the
similar behavior for a right lane departure
when only the right lane marking has been
detected.
Left Lane Departure — Both Lane Lines Detected
• When the LaneSense system is ON and
both the lane markings have been de-
tected, the system is "armed" to provide
visual warnings in the instrument cluster
display and a torque warning in the steering
wheel if an unintentional lane departure
occurs .The lane lines turn from gray to
white and the LaneSense telltale
is
solid green.
• When the LaneSense system senses a lane
drift situation, the left lane line turns solid
yellow. The LaneSense telltale
changes
from solid green to solid yellow. At this time
torque is applied to the steering wheel in
the opposite direction of the lane boundary.
For example: If approaching the left side of
the lane the steering wheel will turn to the
right.
ST
ARTING
AND
OPERA
TING
178