RAM 1500 2019, User Manual

Page: 51 / 340

If the buffeting occurs with the sunroof open,
adjust the sunroof opening to minimize the
buffeting or open any window.
Sunshade Operation
The sunshade can be opened manually. How-
ever, the sunshade will open automatically as
the sunroof opens.
NOTE:
The sunshade cannot be closed if the sunroof
is open.
Pinch Protect Feature
This feature will detect an obstruction in the
closing of the sunroof during the Express
Close operation. If an obstruction in the path
of the sunroof is detected, the sunroof will
automatically retract. Remove the obstruc-
tion if this occurs.
NOTE:
If three consecutive sunroof close attempts
result in Pinch Protect reversals, Pinch Pro-
tect will disable and the sunroof must be
closed in Manual Mode.
Venting Sunroof — Express
Push and release the Vent button within one
half second and the sunroof will open to the
vent position. This is called “Express Vent”,
and it will occur regardless of sunroof position.
During Express Vent operation, any other ac-
tuation of the switch will stop the sunroof.
Sunroof Maintenance
Use only a non-abrasive cleaner and a soft
cloth to clean the glass panel.
Ignition Off Operation
The power sunroof switch will remain active
for up to approximately 10 minutes after the
ignition switch is turned to the OFF/LOCK
position. Opening either front door will can-
cel this feature.
NOTE:
Ignition Off time is programmable through
the Uconnect System. Refer to “Uconnect
Settings” in “Multimedia” in your Owner’s
Manual for further information.
Relearn Procedure
For vehicles equipped with a sunroof, there is
a relearn procedure that allows you to cali-
brate the sunroof when the “Express Opera-
tion” feature stops working. To reset the sun-
roof, follow these steps:
1. Set the ignition to the ACC or the ON/RUN
position.
2. Ensure that the sunroof is in the fully
closed position.
3. Push and hold the close switch. The sun-
roof will hit the hard stop and move to the
vent position after ten seconds.
4. Release the close switch.
5. Push and hold the close switch again within
five seconds to begin the teaching process.
The sunroof will complete one full cycle
and return to the fully closed position.
NOTE:
If the close switch is released anytime dur-
ing the teach cycle, the procedure will need
to be repeated starting from the first step.
49