www.raisecom.com
User Manual
56
Note:
sub-card type 1-3 added three kinds of sub-card: 10FXS, 10FXO and nSnO models, increase
the number of channels to 10, increase 10-line mode, this card can be used as 8-linel card (10-line
mode: disable) or as 10-line card (10-line mode: enable) Other configurations follow the original
rules. In the 10-line card mode will show as the following pattern:
Card type 1 FXS audio user sub-card:
Type: 1 FXS sub-card timeslot numbers:10 Set Mode: Hardware
PCB version: REV C.0 CPLD version: REV 1.0
Signal: Have Input signal: Original signal Output signal: Reversal signal
Signal bit: (CH1:CH2): A A A A B B B B A A
10-line modesetting: enable
Card type 2 FXO audio relay sub-card:
Type: 2 FXO sub-card timeslot numbers: 10 Set Mode: Hardware
PCB version: REV C.0 CPLD version: REV 1.0
Signal: Have Input signal: Original signal Output signal: Reversal signal
Signal bit: (CH1:CH2): A A A A B B B B
A A
10-line modesetting: enable
Card type 3 FXO and FXS hybrid sub-card:
Type: 3 FXS and FXO hybrid sub-card timeslot l numbers: 8 Set Mode: Hardware
PCB version: REV A.3 CPLD version: REV 1.0
Signal: Have Input signal: Original signal Output signal: Reversal signal
Signal bit:(CH1:CH2) : A A A A B B B B
Channel type:(CH1:CH2) : S S S S 0 0 0 0
10-line modesetting: disable
Card type 4 E&M 2W audio relay sub-card:
Type: 4 E&M 2W sub-card Timeslot number: 8 Set Mode: Hardware
PCB version: REV A.3 CPLD version: REV 1.0
Signal: Have Input signal: Original signal Output signal: Reversal signal
Signal bit:(CH1:CH2) : A A A A B B B B
Card type 5 E&M 4W audio relay sub-card:
Type: 5 E&M 4W sub-card Timeslot number: 4 Set Mode: Hardware
PCB version: REV A.3 CPLD version: REV 1.0
Signal: Have Input signal: Original signal Output signal: Reversal signal
Signal bit:(CH1:CH2) : A A A A B B B B
Note
: The signal of later 4 channels will display as well, but it is meaningless.
Sub-card type 6 V35 data user card information:
Type: 6 V35 User Board Timeslot Number: 0 Set Mode: Hardware
