www.raisecom.com
User Manual
7
Chapter 3
Technical Specification
3.1 Up-link sub-card
3.1.1 E1 interface specification
¾
Standard baud rate: 2048Kbps±50ppm
¾
Interface coding:
HDB3
¾
Interface impedance: 75
Ω
(unbalanced), 120
Ω
(balanced)
¾
Electric features:
comply with ITU-T G.703
¾
Frame format:
comply with ITU-T G.704
¾
Jitter:
comply with ITU-T G.823
¾
E1 connector type: balanced RJ45 connector and unbalanced CC3 female connector
¾
E1 cable type: SYV 75-2-2 thin coaxial cable is recommended for unbalanced signal
(transmission distance is further than 200m); 0.6mm (22AWG) twisted-pair is recommended
for balanced signal. PCM30 and PCM31 are both available.
3.1.2 Optical interface specification
¾
Standard rate:
150Mbps
¾
Interface coding:
Special scrambling code
¾
Optical connector:
SC type
¾
Optical connector:
SC type (FC is also available to some dual-strand type)
Type Interface
Wavelength
nm
Tx power
dBmW
Rx sensitivity
dBmW
Saturation
dBmW
Typical range
Km
Attenuation
dB/Km
RC3000-OPT-FE-S1
DSC
1310
-15 ~ -8
-31
-8
0 ~ 25
0.5
RC3000-OPT-FE -S2
DSC
1310
-5 ~ 0
-35
-3
10 ~ 50
0.5
RC3000-OPT-FE -S3
DSC
1550/DFB
-5 ~ 0
-35
-3
15 ~ 120
0.25
RC3000-OPT-FE -SS13 SC/PC T1310/R1550 -15 ~ -8
-31
-8
0 ~ 25
0.5
RC3000-OPT-FE -SS15 SC/PC T1550/R1310 -15 ~ -8
-31
-8
0 ~ 25
0.5
RC3000-OPT-FE -SS23 SC/PC T1310/R1550
-5 ~ 0
-35
-3
10 ~ 50
0.5
RC3000-OPT-FE -SS25 SC/PC T1550/R1310
-5 ~ 0
-35
-3
10 ~ 50
0.5
3.1.3 Ethernet interface specification
¾
RJ-45 interface of UTP, the longest transmission distance of CAT-5 cable is 100m.
¾
Comply with IEEE 802.3, 10/100M auto-negotiation, full/half duplex auto-negotiation.
¾
Support IEEE 802.1d Spanning Tree relay, IEEE 802.1q VLAN packet relay
¾
Maximum Ethernet frame size is 1916 bytes
¾
Support flow control of IEEE 802.3x in full duplex
¾
Support flow control of backpressure in half duplex
¾
AUTO-MDI/MDIX
