ESP-SMT Smart Modular Control System
57
Mounting the Controller
Before you mount the controller, we recommend you
remove the door and face panel. Although these steps are
not absolutely necessary, they will make installation easier.
A
If necessary, unlock the door with the supplied key.
Open the door of the cabinet and swing it to the left.
B
Remove the door from the hinges.
C
Open the face panel by grasping the crescent shaped
finger hold on the top right side of the cabinet. Swing
the face panel to the left.
D
Disconnect the ribbon cable from the panel by gently
pulling the
connector
up and away from the socket.
Avoid pulling directly on the ribbon cable.
E
Slip the front panel hinge pins out of the cabinet
sockets. Remove the bottom of the panel first.
F
CAUTION:
When re-assembling the connector,
observe the keyed orientation of the connector. If
correctly connected, the red line on the cable will be
on the top side.
ALARM
ENGLISH
ESPAÑOL
ENGLISH
ESPAÑOL
SMART MODULAR CONTROLLER
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
RESTORE
SETTINGS
MANUAL
WATERING
OFF
LAWN SPRINKLER CONTROL
-DOMESTIC-
INPUT: 120 VAC, 0.3 AMPS, 60Hz
OUTPUT: 25.5 VAC, 1.0 AMPS, 60Hz
SMX SENSOR
ACCESSORY
IF DISPLAY IS SCRAMBLED
OR BLANK, PUSH THE
RISK OF FIRE, EXPLOSION AND ELECTRICAL SHOCK.
THIS CONTROLLER USES A NON-REPLACEABLE LITHIUM
BATTERY. DISPOSE OF ALL ELECTRONIC PRODUCTS IN
ACCORDANCE WITH LOCAL LAWS AND FEDERAL REGULATIONS.
RESET
RESET BUTTON
This device complies with Part 15 of the FCC Rules.
Operation is subjected to the following two conditions:
(1)
(2)
This class B digital apparatus meets all requirements of the
Canadian Interference Causing Equipment Regulations.
Cet appariel Numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
This device may not cause harmful interference and
This device must accept any interference received,
including interference that may cause undesired operation.
WARNING
LAWN SPRINKLER CONTROL
-DOMESTIC-
INPUT: 120 VAC, 0.3 AMPS, 60Hz
OUTPUT: 25.5 VAC, 1.0 AMPS, 60Hz
SMX SENSOR
ACCESSORY
IF DISPLAY IS SCRAMBLED
OR BLANK, PUSH THE
RISK OF FIRE, EXPLOSION AND ELECTRICAL SHOCK.
THIS CONTROLLER USES A NON-REPLACEABLE LITHIUM
BATTERY. DISPOSE OF ALL ELECTRONIC PRODUCTS IN
ACCORDANCE WITH LOCAL LAWS AND FEDERAL REGULATIONS.
RESET
RESET BUTTON
This device complies with Part 15 of the FCC Rules.
Operation is subjected to the following two conditions:
(1)
(2)
This class B digital apparatus meets all requirements of the
Canadian Interference Causing Equipment Regulations.
Cet appariel Numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
This device may not cause harmful interference and
This device must accept any interference received,
including interference that may cause undesired operation.
WARNING
AB
C
D
E
C