ESP-SMT Smart Modular Control System
8
Set Minutes
e.
The
minutes
will begin to blink.
Press the
- or +
button(s) until the
current minutes are shown; then
press the
NEXT
button to review
the current Date & Time settings.
Review Current Date & Time
B
Review the information on the
screen to confirm that all settings
are correct:
• If the information is not
correct:
Press either the
BACK
button
or the
NEXT
button to navigate
backward or forward to the
section that requires a change;
then follow the instructions
above to make a modification to
that section.
• If the information is correct:
Rotate the dial into any other
position and the entered
information in the SET DATE &
TIME dial position will be saved
in the controller memory. The
internal lithium battery will save
the current date and time during
power outages.
Review Checklist
!
NOTE:
To rapid advance through
the values shown on various
screens, depress and hold the
corresponding navigation button
to activate the “Accelerator”
feature.
You have now completed all of the required
steps to set the current date and time on the
controller.
B
e.
Set Current Date
Set Current Time
Set Current Month
Set Current Day of Month
Set Current Year
Set Current Hour
(
confirm
or
is correct)
NOTE:
AM
PM
Set Current Minute