ESP-SMT Smart Modular Control System
30
d.
The
value
for the
Minutes Per
Cycle
will begin to blink. Press the
- or +
button(s) to adjust to the
desired Minutes Per Cycle (this value
can be from 1 to 30 minutes per
cycle); then press the
NEXT
button
and the ZONE REVIEW screen will
appear.
Review Zone Information
The REVIEW screen displays the
previously entered information for the
specific zone that you entered in the
previous steps following the Zone Input
Wizard
31
If you want to change any of the
information on the REVIEW screen,
press the
CHANGE
button and the
SOIL TYPE screen will appear. Go
to step 5 on page 20 to change the
information as required.
32
If you accept all of the information
in the REVIEW screen then press the
ACCEPT
button.
33
The SELECT ZONE screen will
appear. Select the next zone and
repeat steps starting on page 19 for
all zones that will be enabled either
now or in the future.
As you enter information for each
active zone, it will be saved for recall
in the event of a power outage.
You have now completed all of the required
steps for the INPUT ZONE INFORMATION
dial position (see page 31 for Review
Checklist).
d.
31
32
30
33
NEWLY PLANTED
Day For Next
14 Days
Water Every Calendar
Cycles Per Day
6
Minutes Per Cycle
09:00 AM
to
04:00 PM
8
Zone 2
NEXT
BACK
REVIEW
ON
Rotor
0.4 in/hr
8° - up
Average
75% Shade
Sandy Loam
Slope
Shrubs
Plants Established
Zone 2
CHANGE
Sparse
ACCEPT
REVIEW
ON
Rotor
0.4 in/hr
8° - up
75% Shade
Sandy Loam
Slope
Shrubs
Plants Established
Zone 2
CHANGE
Sparse
ACCEPT
Average
SELECT ZONE
Zone
3
NEXT
BACK
OFF