ESP-SMT Smart Modular Control System
48
Restore “Factory Default”
Program Settings
E
The RESTORE SETTINGS FROM
screen will appear and Contractor
Defaults will be blinking. Press the
UP or DOWN
button(s) until the
Factory Defaults
begins to blink;
then press the
SELECT
button.
F
RESTORE CURRENT SETTINGS FROM
Factory Defaults will appear. Press
the
RESTORE
button.
G
A WARNING screen will appear. If
you want to continue to restore the
original factory settings. Press the
CONTINUE
button.
H
The RESTORING TO Factory Defaults
screen will appear with a message
that reads: Please Wait While Unit
Reconfigures.
I
While the ESP-SMT is restoring
the Factory Default settings, the
screen as shown will appear until all
information has been programmed
into the ESP-SMT controller.
!
NOTE:
If you elect to restore
Factory Defaults, all previously
programmed information will be
erased and replaced with Factory
default values. Information saved
in Contractor Defaults is not
erased.
G
F
E
H
I
RESTORE SETTINGS FROM
Contractor Defaults
Factory Defaults
SELECT
RESTORE CURRENT
SETTINGS FROM:
Factory Defaults
RESTORE
QUIT
WARNING
Restoring Factory
Defaults Will Delete
ALL Current Settings.
Contractor Defaults
Will Be Retained.
RESTORE
QUIT
RESTORING TO
Factory
Defaults
Please Wait While
Unit Reconfigures
Rain Bird
ESP-SMT
Smart Modular
Controller