Rain Bird ESP-LXD, Installation, Programming & Operation Manual

Page: 2 / 138

Symbols
b b
NOTE: Symbol is intended to alert the user to important operating,
functionality or maintenance or installation instructions.
b c
WARNING:
Symbol is intended to alert the user to the presence
of electricity within the controller which may constitute a risk of
electronic shock or other hazard.
b d
CAUTION: Symbol is intended to alert the user to important
instructions or conditions that could seriously affect irrigation
effectivity or controller operation.
b g
DIAL: Symbol indicates that the user is required to turn the dial
on the controller to the appropriate setting in order to follow
subsequent instructions as described in that section.
b e
REPEAT: Symbol indicates that a repetition of previous steps
or actions may be required in order to continue or complete the
controller programming process.
Safety Information
b c
WARNING:
A circuit breaker or cutoff switch must be provided
in the fixed wiring to isolate the controller.
b c
WARNING:
The current date and time on the controller is
retained by a long-life lithium battery, which must be disposed of
in accordance with local regulations.
Regulatory Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If the equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by the
following measures:
b l
Reorient or relocate the receiving antenna.
b l
Increase the separation between the equipment and the receiver.
b l
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
b l
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Rain Bird
Corporation could void the user’s authority to operate the equipment.
This product was FCC certified under test conditions that included the
use of shielded I/O cables and connectors between system components.
To be in compliance with FCC regulations, the user must use shielded
cables and connectors and install them per instructions.
For technical assistance contact Rain Bird at 800 RAINBIRD (1-800-724-6247) U.S. and Canada
Visit us on the web at www.rainbird.com