Rain Bird ESP-LXD, Installation, Programming & Operation Manual, Page: 31 / 138

25 ESP-LXD Controller
Set Watering Start Times
Start times are the time(s) of day that the program begins.
You can assign up to eight Start Times to a single program. Multiple
Start Times allow you to run a program more than once on each day.
For example, if you’re growing new lawn seed, you may want to water
several times a day to keep the seedbed or top dressing damp.
b b
NOTE: Start times apply to the entire program and not just to an
individual station.
b g
Turn the controller dial to Set Watering Start Times.
A
The Set Start Times screen appears. Press the + and – buttons to
set Start Time for the current program; then press Next.
b l
Press and HOLD buttons to accelerate settings for hours and
minutes.
b b
NOTE: If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
B
Press the + and – buttons to set the start number (1 through 8).
1 2
b e
Change the Program Select switch and repeat this process to set
up additional Watering Start Times for other programs as desired.
b b
NOTE: Cycle+Soak
TM
is an alternative method of dividing the
total Station Run Time into smaller cycle times. If you plan to use
Cycle+Soak, only a single Watering Start Time is required for each
program. See Section D, Cycle+Soak for more details.