![background image](http://html1.mh-extra.com/html/rae/toxirae-pro-co2/toxirae-pro-co2_user-manual_3363938038.webp)
ToxiRAE Pro CO
2
User’s Guide
36
12.1.1. AutoRAE 2 Cradle
Note:
This procedure only works with a single AutoRAE 2 Cradle. It will not work with
an AutoRAE 2 Controller.
To program a ToxiRAE Pro CO
2
via an AutoRAE 2 Cradle, you need ProRAE Studio II
Instrument Configuration and Data Management Software, the AutoRAE 2 Cradle
connected to a power source, and a USB PC communications cable.
1.
Connect a USB cable between a PC with ProRAE Studio II and the AutoRAE 2
Cradle.
2.
Apply power to the AutoRAE 2 Cradle.
3.
Turn off the ToxiRAE Pro CO
2
(or put the ToxiRAE Pro CO
2
into PC
Communications Mode) and set it in the cradle.
4.
Start ProRAE Studio II software on the PC.
5.
Select “Administrator” and input the password (the default is “rae”).
6.
Click “Detect the instruments automatically” (the magnifying glass icon with the
letter “A” in it). After a few seconds, the AutoRAE 2 Cradle is found and it is shown,
along with its serial number:
7.
Click on the icon to highlight it, and then click “Select.”