![background image](http://html1.mh-extra.com/html/rae/toxirae-pro-co2/toxirae-pro-co2_user-manual_3363938032.webp)
ToxiRAE Pro CO
2
User’s Guide
30
To save your new PAN ID and exit, press [MODE] repeatedly until “OK” is
highlighted. Then press [Y/+]. It says, “Applying settings…” and then “Settings
applied successfully!” to indicate they have been registered. The menu now advances
automatically to “Channel.”
Channel
Every network operates on its own channel, between 01 and 10 (do not
use 00). If you need to know the network’s channel, check the
EchoView Host’s setting.
Note:
In Europe, only Channel 00 can be
used, and it is preset (it cannot be changed).
Choose and enter a 2-digit Channel:
1.
Press [Y/+] and the display shows the current Channel. Example: “10.” The left-
most digit is highlighted.
2.
Press [Y/+] repeatedly to select a desired number. Once 9 is reached, pressing
[Y/+] again “wraps” around back to 0.
3.
Press [MODE] to advance to the next digit.
Repeat this process until all eight characters of the new Channel are entered.
To save your new Channel number and exit, press [MODE] repeatedly until “OK” is
highlighted. Then press [Y/+]. It says, “Applying settings…” and then “Settings
applied successfully!” to indicate they have been registered. The menu now advances
automatically to “Join Network.”
Join Network
This screen is for joining an existing network. When you see this
screen, press [Y/+] to join, or [MODE] to exit without joining.
While searching for the network, the message “Joining network…” is displayed.
If the network is found and successfully joined, then “Join network successful!” is
displayed. Press [MODE] to acknowledge the connection and return to the Wireless
menu.
If the network is not joined, the display shows: “Join network failed!” You have two
options: Exit and Retry. If you want to retry, check that your network setting is
correct (matches the EchoView Host) and that the EchoView Host is turned on and
operating. Then press [Y/+] to retry.
Interval
This sets the amount of time between data transmissions to the
EchoView Host.
To change the Interval:
1.
Press [MODE] to step from one option to the other. The highlighted option
changes each time you press [MODE].