![background image](http://html1.mh-extra.com/html/rae/toxirae-pro-co2/toxirae-pro-co2_user-manual_3363938031.webp)
ToxiRAE Pro CO
2
User’s Guide
29
11.5.4. Monitor Setup
Wireless
There are seven Wireless parameters:
•
Radio On/Off
•
PAN ID
•
Channel
•
Join Network
•
Interval
•
Off Network Alarm
•
Factory Reset
Radio On/Off
This turns the wireless modem on or off.
Note:
Turning the radio off does not change any of the settings.
They are stored and ready for use the next time the wireless modem
is turned on.
1.
Choose an “On” or “Off” by pressing [MODE] until your choice is highlighted.
(The dark circle in the “radio button” indicates that an option has been selected).
2.
Press [Y/+] to select it.
3.
Press [MODE] repeatedly until “Exit” is highlighted.
4.
Press [Y/+] to register your selection and exit.
To exit without saving the new value:
1.
Make sure your previous setting is selected.
2.
Press [MODE] repeatedly to advance to Exit.
3.
Press [Y/+] to exit.
PAN ID
All units on a network must be programmed with the same Pan ID
(Personal Network Identifier) to ensure communication compatibility.
Important!
The allowed range for Pan ID numbers is 001 through
999.
Choose and enter a 3-digit PAN ID:
1.
Press [Y/+] and the display shows the current PAN ID. Example: “866.” The left-
most digit is highlighted.
2.
Press [Y/+] repeatedly to select a desired number. Once 9 is reached, pressing
[Y/+] again “wraps” around back to 0.
3.
Press [MODE] to advance to the next digit.
Repeat this process until all eight characters of the new PAN ID are entered.