ToxiRAE Pro CO
2
User’s Guide
21
11.4.1. Navigating Programming Menus
Navigating through the Programming menus is easy and consistent, using a single
interface format of a “forward arrow” and “Select,” controlled by the [MODE] key and
[Y/+] key, respectively.
In the submenus, the functions of a “down arrow” and “Select” are controlled by the
[MODE] key and [Y/+] key, respectively.
Also in submenus, the functions of the keys may correspond to the instruction directly
above each key. Therefore, if it says “OK” above the [MODE] key, pressing [MODE]
selects “OK.” When setting numerical data, the [MODE] key typically selects which digit
is highlighted, while each press of [Y/+] increases the digit by 1.
11.5. Programming Menus
Programming allows anyone with the password to change the instrument’s settings, calibrate
the instrument, enter user information, etc. Programming has four menus. Each menu
includes several submenus to perform additional programming functions.
This table shows the menus (and their icons) and submenus, described in the following
section:
Calibration
Alarm Setting
Datalog
Monitor Setup
Zero Calibration
High Alarm
Clear Datalog
Wireless
Span Calibration
Low Alarm
Interval
Site ID
Bump Test
STEL Alarm
Data Selection
User ID
TWA Alarm
Datalog Type
User Mode
Alarm Mode
Date
Buzzer & Light
Time
Man Down
Alarm
Temp. Unit
Language
Zero At Start
LCD Contrast
Note:
There is also an “Exit” icon. It has only one function. When you select it, the
instrument exits Programming Mode, updates the settings, and returns to monitoring.
