![background image](http://html1.mh-extra.com/html/rae/toxirae-pro-co2/toxirae-pro-co2_user-manual_3363938033.webp)
ToxiRAE Pro CO
2
User’s Guide
31
2.
Press [Y/+] to make your selection (the dark circle in the “radio button” indicates
the option has been selected).
3.
When you have completed your selection, press [MODE] repeatedly until “Exit”
is highlighted.
4.
Press [Y/+] to save your selection, exit the Interval menu, and advance to “Off
Netwk Alarm.”
Off Netwk Alarm
When this is enabled, the unit goes into alarm whenever an active
network connection is lost. This informs you that connectivity has
been broken between the ToxiRAE Pro CO
2
and the EchoView
Host.
1.
Choose “On” or “Off” by pressing [MODE] until your choice is highlighted. (the
dark circle in the “radio button” indicates that an option has been selected).
2.
Press [Y/+] to select it.
3.
Press [MODE] repeatedly until “Exit” is highlighted.
4.
Press [Y/+] to register your selection and exit.
To exit without saving the new value:
1.
Make sure your previous setting is selected.
2.
Press [MODE] repeatedly to advance to Exit.
3.
Press [Y/+] to exit.
Factory Reset
Selecting this resets the wireless settings to their original factory
configurations.
CAUTION!
A factory reset of the wireless settings deletes any customized
settings and cannot be undone.
1.
Press [Y/+] to select “Factory Reset.” You will see the message “Reset wireless
settings?”
2.
Press [Y/+] for “Yes” or [MODE] for “Exit.” If you select “Exit,” the ToxiRAE
Pro CO
2
exits without performing a factory reset.
Exit (the Wireless Submenu)
Press [Y/+] to exit. Wireless is exited, and Monitor Setup is highlighted.
Site ID
Choose and enter an 8-digit alphanumeric Site ID to uniquely identify the particular site
where the instrument is to be used. This Site ID is included in the datalog report.
1.
Press [Y/+] and the display shows the current Site ID. Example: “SITE0001.” The
left-most digit is highlighted.
2.
Press [Y/+] repeatedly to select a desired character. Letters increase from current
value to Z followed by digits from 0 to 9. Once 9 is reached, pressing [Y/+] again