APPENDIX B
B-4
Figure 3.
Advanced Tools>>Define Max Unit. Select the ‘Define Max
Unit’ from the ‘Advanced Tools’ bar (A), and proceed to select the number
of units the controller will attempt to communicate with (B).
If communication problems persist after going through steps
one through eight, then please email RAE Systems at
[email protected].
Updates:
Watch for updates of this and all of other technical
and application notes on the Internet at
www.raesystems.com
Disclaimer:
Actual setup and configuration may vary with computer
manufacturers, models, operating systems, system hardware configurations,
system software configurations, and application software. Please refer to your
computer hardware and software manuals for details.
