PROGRAMMING AREARAE-Gamma
4-22
4.6.3 Select Data Type
The user can choose to store either the average or the peak
value during each datalog period.
1. When the “Select Data Type?” submenu item appears,
press [Y/+], the display shows the current data type: “Data
Type = Average?”
2. Press [Y/+] to accept the currently displayed data type and
automatically goes into View Datalog. Press [N/-] to
change to the other data type: “Data Type = Peak?” Press
[MODE] to exit this submenu and move on to the next
submenu.
3. If there is any change to the existing selection, press [Y/+],
and the display will show “Save?” Then, press [Y/+] to
accept or the [N/-] to discard and move to the next
submenu.
NOTE:
It is necessary to select “Average” data type in order to
calculate the correct STEL and TWA data for datalogging
report.
