Radyne DMD2050, Operation Manual

Page: 76 / 214

DMD2050 Universal Satellite Modem User Interfaces
TM110 – Rev. 1.3 4-19
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
ES INTERFACE {RS-232, RS-485}
Allows the user to select the interface type.
ES
BITS/CHAR {7,8}
Allows the user to choose between 7 or 8 bit data.
RX ES ENHANCED (menu)
RX ASYNC MODE {ES-ES, ESC ENHANCED}
ES-ES is the normal IBS Async Channel. ESC
Enhanced ca be selected in Closed Net and uses the
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
ES INTERFACE {RS-232, RS-485}
Allows the user to select the interface type.
ES BAUD RATE {150 - 19200}
Allows the user to select the baud rate in Enhanced
Async Mode. Available rates are listed in Table 3-3.
ES
BITS/CHAR {7,8}
Allows the user to choose between 7 or 8 bit data.
4.3.5 AUPC Menu Options and Parameters
AUPC Menus are only available when the Modulator is in ‘Closed Net’
Network Spec and Framing is ‘EFAUPC 1/15’.
4.3.6 Monitor Menu Options and Parameters
EVENTS
Displays a history of events recorded in the event buffer.
A maximum of 100 events may be stored in the buffer.
Upon receipt of the 101
st
event, the first received event
is automatically deleted, and so on, maintaining the
maximum 100 events.
ERASE EVENTS.. PRESS CLEAR
Allows the user to clear the contents of the Event Buffer
by pressing <CLEAR> on the keypad..
INPUT LVL (dBm)
Displays the estimated receive signal level as seen by
the Demodulator.