Radyne DMD2050, Operation Manual

Page: 115 / 214

User Interfaces DMD2050 Universal Satellite Modem
4-58 TM110 - Rev. 1.3
4.8.5 Setting Up The DMD20/DMD20 LBST Ethernet Bridge To Operate Like
A FIFO
In certain circumstances, it may be desirable to have the Ethernet interface operate in a FIFO like
manner with no reordering of packets. This can be established by using a single port on the
Ethernet interface and setting the Ethernet QOS Type to Port Based and the Ethernet QOS
Queue to Strict Priority. When Setup and used in theis manner, the packets will be transmitted in
the exact order in which they are received.
Figure 4-7. Point-to-Multipoint with Daisy Chaining
4.8.6 Packet Statistics
The following statistics are available under the Monitor Menu when the Ethernet Data Interface is
selected.
Total Packets: This Counter displays the total number of Ethernet packets received from the
satellite.
Error Packets: This counter displays the total number of Ethernet packets received from the
satellite that had errors.
Packet Error Rate: This displays the Ethernet Packet Error Rate (PER) from the satellite.
Packet Statistics Reset: Allows the user to reset the Ethernet Total Packets and Ethernet Error
Count by pressing <Enter>.